基于七换能器结构的Band3-Rx滤波器产品设计
作者:
作者单位:

作者简介:

史向龙(1984-),男,内蒙古省巴彦淖尔市人,高级工程师,主要从事声表面波器件的研究

通讯作者:

基金项目:

伦理声明:



Design of Band3-Rx Filter Based on 7-IDT Structure
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    该文介绍了一种用于Band3频段接收端的声表面波滤波器的研制过程。为满足滤波器的大宽带性能及阻带低端的高选择性要求,采用七阶叉指换能器混合结构的耦合模式模型进行自动优化设计和多次优化迭代,并利用有限元法/边界元法(FEM/BEM)软件进行精确的声学验证,最后通过实验验证了仿真结果的有效性。

    Abstract:

    This paper introduces the development process of a surface acoustic wave(SAW) filter for Band3 receiver. In order to satisfy the large-bandwidth performance of the filter and the high selectivity at the low end of the stopband, a 7-interdigital transducer(7-IDT) hybrid structure is used, and the coupling of mode model is used for automatic optimization design and multiple optimization iterations. And use finite element method/boundary element method(FEM/BEM) software to carry out accurate acoustic verification, and finally through the test to verify the effectiveness of the simulation results.

    参考文献
    相似文献
    引证文献
引用本文

史向龙,陈晓阳,张俊茜,苏波,于倩至,孙伟彬.基于七换能器结构的Band3-Rx滤波器产品设计[J].压电与声光,2022,44(2):230-233. SHI Xianglong, CHEN Xiaoyang, ZHANG Junxi, SU Bo, YU Qianzhi, SUN Weibin. Design of Band3-Rx Filter Based on 7-IDT Structure[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2022-05-11
  • 出版日期: