基于枝节加载的内嵌式三频滤波器设计
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

国家自然科学基金资助项目(61102075) ;模拟集成电路重点实验室基金资助项目(61428020115162802003);重庆市重点产业共性关键技术创新专项基金资助项目(cstc2016zdcyztzx0038)

伦理声明:



Design of a Triband Filter With Embedded Structure Based on Stub Loaded
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    利用λ/4(λ为波长)的多模谐振器(MMR),通过输入、输出端共用短路过孔,采用内嵌方式设计了一款WLAN频段(2.4 GHz /5.2 GHz)的双频滤波器,在此基础上,通过开路枝节加载方式,设计了一款中心频率为2.3 GHz /3.3 GHz /5.5 GHz的三频段滤波器。滤波器尺寸为11 mm×9 mm,满足小型化的要求。利用HFSS12软件设计并仿真,得到验证结果。实验结果表明,双频段和三频段滤波器的损耗参数s11和s21均达到标准,可适用于无线通信系统。

    Abstract:

    A dual band filter with embedded structure operating at WLAN band (2.4 GHz/5.2 GHz) is designed by using the multimode resonator with λ/4 wavelength and sharing the input and output shortcircuit.Then on the basis of the dual band filter design, a triband filter with center frequency of 2.3 GHz/3.3 GHz/5.5 GHz is designed based on the open stub loading.The size of the filter is 11 mm×9 mm,which meets the requirement of miniaturization.The HFSS12 software is used for filter design and simulation.The results show that both the dualband and triband filter parameters of s11 and s21 are up to the standard,the filters can be used for wireless communication system.

    参考文献
    相似文献
    引证文献
引用本文

杨虹, 肖雄, 彭松, 马晋毅.基于枝节加载的内嵌式三频滤波器设计[J].压电与声光,2017,39(5):688-690. YANG Hong, XIAO Xiong, PENG Song, MA Jinyi. Design of a Triband Filter With Embedded Structure Based on Stub Loaded[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-10-10
  • 出版日期: