高频压电器件用Co2O3改性PbTiO3基压电陶瓷
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

伦理声明:



The Development of Co2O3-modified PbTiO3-based Piezoelectric Ceramic for High Frequency Devices
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    报道了一种适用于高频压电器件的Co2O3改性Pb(Mn1/3Sb1/3)O3-PbTi O3(PT-PMS)基陶瓷。采用轧膜成型工艺制备了PT-PMS压电陶瓷,研究了加入Co2O3对陶瓷的介电、压电和机电性能的影响。结果表明,加入适量Co2O3,提高了陶瓷烧结密度,改善了陶瓷压电性能;同时,Co2O3的硬性掺杂作用使陶瓷的机械品质因数Qm明显上升。当Co2O3的质量分数为0.65%时,陶瓷表现出良好的机电性能:εr=290,d33=78 pC/N,kp=0.133,kt=0.489,Qm=2 162,TC=325℃。此外,该陶瓷具有高的居里温度TC,能满足回流焊工艺要求。

    Abstract:

    This paper reported a Co2O3-modified Pb(Mn1/3Sb1/3)O3-PbTiO3(PT-PMS) ceramics,which is suitable for application to high frequency piezoelectric devices.The PT-PMS piezoelectric ceramics has been prepared by the rolling process.The effect of Co2O3 addition on the dielectric,piezoelectric and electromechanical properties of the ceramics has been investigated.The experiment results indicated that a proper amount of Co2O3 doping could increase the ceramic density,and improve the piezoelectric properties.Meanwhi...

    参考文献
    相似文献
    引证文献
引用本文

欧阳明智,朱满康,侯育冬,严辉.高频压电器件用Co2O3改性PbTiO3基压电陶瓷[J].压电与声光,2011,33(1). OUYANG Mingzhi, ZHU Mangkang, HOU Yudong, YAN Hui. The Development of Co2O3-modified PbTiO3-based Piezoelectric Ceramic for High Frequency Devices[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: