一种LTCC叠层耦合馈电圆极化微带天线的设计
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

国家高技术研究发展计划基金资助项目(2009AA03Z414)

伦理声明:



A Design of an Aperture coupled Circularly Polarised Microstrip Antenna Based on LTCC Technology
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    设计了一种低温共烧陶瓷(LTCC)低剖面圆极化叠层耦合微带贴片天线。该天线采用层叠结构,在辐射基板正面采用分形的辐射贴片来降低天线尺寸并拓展带宽;在馈电层基板正面开“十字”槽,在其反面通过使用威尔金森功分器加移相器网络对“十字”槽馈电,使得耦合馈电端口的正交电场相位差90°来实现微带天线的圆极化。该天线设计剖面厚度仅3 mm。仿真结果显示该天线工作于1.268 GHz时,实现阻抗带宽超过60 MHz,天线的轴比小于1.5 dB且增益达到5 dB。

    Abstract:

    An aperture coupled circularly polarized(CP) stacked patch antenna with low profile thickness was designed based on LTCC(low temperature co fired ceramic)technology. The proposed antenna was composed of the two layer stacked LTCC substrates. The fractal patch on the front of radiant substrate can reduce size and expand bandwidth of the antenna. A cross slot on the front of feed layer substrate was fed by Wilkinson power divider with 90° phase difference, which was used for phase shifting of the perpendicularity electric field and circularly polarized radiation.The profile thickness of the antenna was restricted in 3 mm. The simulated results showed that the impedance bandwidth of the antenna exceeded 60 MHz, the axial ratio was less than 1.5 dB and the gain approached 5 dB with the centre frequency of 1.268 GHz.

    参考文献
    相似文献
    引证文献
引用本文

夏祺,赵云,苏桦,张怀武,钟智勇.一种LTCC叠层耦合馈电圆极化微带天线的设计[J].压电与声光,2012,34(6):948-950. XIA Qi, ZHAO Yun, SU Hua, ZHANG Huaiwu, ZHONG Zhiyong. A Design of an Aperture coupled Circularly Polarised Microstrip Antenna Based on LTCC Technology[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-11-23
  • 出版日期: