自顶向下贯穿腐蚀制备空腔型FBAR的方法
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

中国工程物理研究院超精密加工技术重点实验室基金资助项目(2012CJMZZ00009);重庆大学新型微纳器件与系统技术国防重点学科实验室访问学者基金资助项目(2013MS04);中物院电子工程研究所科技创新基金资助项目(S20141203);西南科技大学研究生创新基金资助项目(13YCJJ36、14YCX107、13YCX109和14YCX111)

伦理声明:



Top down Through via Wet Etching Method to Fabricate Cavity Type FBAR
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    牺牲层释放是空腔型薄膜体声波谐振器(FBAR)工艺中形成空腔结构的关键步骤,牺牲层释放的效果直接决定了空腔型FBAR的谐振特性。根据空腔型FBAR中气隙的功能和结构特点,提出了自顶向下贯穿腐蚀牺牲层制备镂空空腔型FBAR的创新工艺方法。为验证该方法的可行性,采用MATLAB对牺牲层腐蚀的恒扩散系数(CDC)模型进行数值迭代,采用Silvaco软件对其腐蚀过程进行仿真,根据仿真结果提出释放窗口的优化设计;采用ANSYS软件对镂空FBAR的谐振特性进行有限元仿真分析,对比常规FBAR发现,镂空FBAR具有较好的谐振特性,且其阻抗零点、阻抗极点频率向高频段漂移,有效机电耦合系数和品质因数降低。

    Abstract:

    The sacrifice layer release is the crucial process step to form the cavity structure of the cavity type film bulk acoustic resonator (FBAR),and the sacrifice layer release result directly determines the resonance characteristics of the cavity type 〖HJ*4/9〗FBAR. Based on the insight of the functional and structural characteristics of the air gap in the cavity type FBAR,a novel process method named as the top down through via wet etching to fabricate the apertured cavity type FBAR is proposed. To validate feasibility of the novel fabrication method, the constant diffusion coefficient (CDC) model numerical iteration of sacrificial layers corrosion process was simulated by MATLAB,and the corrosion process was also simulated by Silvaco software.According to the simulation results,the optimum design of release window is proposed. The resonance simulation of FBAR without release window and with release window have been analyzed with FEA software ANSYS. Comparing the simulation results,it shows that the apertured FBAR still has quite good resonant characteristics,but the frequency of impedance zero point and impedance pole of the apertured FBAR are drifted to a higher frequency band;and the effective electromechanical coupling coefficient and the quality factor of FBAR are reduced.

    参考文献
    相似文献
    引证文献
引用本文

高杨,何移,周斌,何婉婧,李君儒.自顶向下贯穿腐蚀制备空腔型FBAR的方法[J].压电与声光,2014,36(5):679-684. GAO Yang, HE Yi, ZHOU Bin, HE Wanjing, LI Junru. Top down Through via Wet Etching Method to Fabricate Cavity Type FBAR[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-09-25
  • 出版日期: