ST-石英的湿法腐蚀工艺研究
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

伦理声明:



Study on Wet Etching Process of ST-cut Quartz
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    对影响ST 切向石英表面湿法腐蚀质量的因素进行了试验研究,并对结果进行了详细分析。试验基片材料为双面抛光的ST 切向石英晶体,掩蔽膜材料为Cr/Au双层金属膜,腐蚀液为HF和NH4F的混合溶液;主要研究了基片清洗、腐蚀液成分配比及腐蚀温度等工艺参数对基片表面腐蚀质量的影响,并通过选择最佳的试验参数,以约0.7 μm/min的适中腐蚀速率加工出了满足要求的晶体表面。

    Abstract:

    Experiment research on the factors which affect the wet etching quality of ST cut quartz is performed, and the results are discussed in depth. In our experiments, double side polished ST cut quartz, Cr/Au double films, mixtures of hydrofluoric acid (HF) and ammonium fluoride (NH4F), are selected as etch wafer, etch mask and etchants, respectively. The effects of the process parameters including wafer cleaning, composition proportion of etchants and etching temperature on the etching quality of the substrate surface have been investigated. The optimal process parameters are acquired and the crystal surface meeting the requirements is fabricated under moderate etching rate of 0.7 μm/min.

    参考文献
    相似文献
    引证文献
引用本文

林丙涛,唐光庆,周倩,张巧云,翁邦英,班亚娟. ST-石英的湿法腐蚀工艺研究[J].压电与声光,2014,36(5):779-781. LIN Bingtao, TANG Guangqing, ZHOU Qian, ZHANG Qiaoyun, WENG Bangying, BAN Yajuan. Study on Wet Etching Process of ST-cut Quartz[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-09-25
  • 出版日期: