基于1-3压电复合材料的相控聚焦系统
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

国家自然科学基金委重大科学仪器设备研制专项基金资助项目(81127901);国家自然科学基金资助项目(81201102;112744040);国家重点基础研究发展计划(“九七三”计划)基金资助项目(2011CB707900)

伦理声明:



Realization of Phased Focused Ultrasound System Based on 1-3 Piezoelectric Composites
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    针对相控聚焦超声系统控制电路复杂、移相精度低, 锆钛酸铅(PZT)材料制备的换能器转换效率较低的问题。控制电路采用Verilog HDL语言将通信、倍频锁相、信号发生及信号移相功能集成在现场可编程门阵列(FPGA)中。换能器采用1-3型压电复合材料制作。实验结果显示,该相控聚焦系统提高了电路集成度与移相精度及换能器的电声转换效率。

    Abstract:

    Aiming at the complexity of the control circuitry,low phase shift accuracy and the low conversion efficiency of transducer for phased focused ultrasound system,we integrate communications,frequency lock, signal generation,signal phase shift function in a FPGA chip by Verilog HDL language.The transducer is fabricated with 1-3 piezoelectric composites.The experimental results show that the phased focused system improves the circuit integration,phase shift accuracy of circuit and electroacoustic conversion efficiency of transducer.

    参考文献
    相似文献
    引证文献
引用本文

郝琦,何敏,王科鑫,曾德平,叶方伟.基于1-3压电复合材料的相控聚焦系统[J].压电与声光,2015,37(4):662-666. HAO Qi, HE Min, WANG Kexin, ZENG Deping, YE Fangwei. Realization of Phased Focused Ultrasound System Based on 1-3 Piezoelectric Composites[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-07-22
  • 出版日期: