一种高电场激励效率的石英谐振元件设计
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

重庆市青年科技人才培养计划基金资助项目(cstc2014kjrc-qnrc40003)

伦理声明:



Design of Quartz Resonator With High Electric Field Excitation Efficiency
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    设计了一种谐振梁为双“W”截面形状的石英音叉谐振元件,通过在梁表面凹槽的两端设置深凹槽,有效提高了凹槽侧壁的陡直性,进而提高了电场的激励效率。经仿真对比,相对于“H”形截面的谐振元件,双“W”形截面的谐振元件的压电激励力提高约58%。设计了元件芯片工艺方案,并在直径?50 cm的晶片上制作出两种截面形状的谐振元件。测试结果表明,双“W”形截面的谐振元件的品质因数(Q)值和导纳分别由2 387、2 143 ns提高至2 648、2 346 ns,动态阻抗值由548 kΩ降至417 kΩ。

    Abstract:

    According to the anisotropic etching characteristics of quartz crystal, a novel microresonator with two double W shaped crosssection beams was designed. The side well gradient was improved by setting two deep grooves on both sides of the grooves to improve the electric field excitation efficiency. The simulation result showed that the piezoelectric force was improved by 58% comparing to the resonator with two H shaped crosssection beams. Two kinds of resonators were successfully manufactured on a quartz crystal wafer with diameter of ?50 cm. The experimental results showed that the Q factor and admittance of the new resonator were increased from 2 387、2 143 ns to 2 648、2 346 ns, respectively, and the motional impedance was decreased from 548 kΩ to 417 kΩ.

    参考文献
    相似文献
    引证文献
引用本文

林丙涛 林日乐 林朝营 赵建华 李文蕴.一种高电场激励效率的石英谐振元件设计[J].压电与声光,2016,38(6):840-842. LIN Bingtao LIN Rile LIN Chaoying ZHAO Jianhua LI Wenyun. Design of Quartz Resonator With High Electric Field Excitation Efficiency[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-12-20
  • 出版日期: