在非晶硅上制备角度可控缓坡的方法
作者:
作者单位:

作者简介:

通讯作者:

基金项目:

国家自然基金资助项目(61471086);中国工程物理研究院超精密加工技术重点实验室开发基金课题项目(2014KZ001)

伦理声明:



Method of Preparing the Angle Controllable Slope on Amorphous Si
Author:
Ethical statement:

Affiliation:

Funding:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    介绍了一种利用光的衍射原理制备角度可控缓坡微结构的方法。该方法在光刻步骤中通过调节掩膜板与基片之间的垂直距离来控制光刻胶图形边缘曝光量,光刻显影后得到剖面为正梯形的光刻胶图形,再经过干法刻蚀得到非晶硅的缓坡微结构。结果表明,制备的非晶硅缓坡结构角度(可小于30°)可控,制备方法简单,与半导体工艺兼容,可避免湿法刻蚀带来的过蚀及角度不均匀问题。

    Abstract:

    A method of preparing angle controllable micro slope microstructure by using the diffraction of light is introduced in this paper. The method is to control the exposure of the edge of the photoresist pattern at the exposure stage by adjusting the distance between the mask plate and the substrate. Then, the photoresist pattern with positive trapezoidal profile is obtained after the photolithographic development. Finally, a micro slope structure with controllable angle on amorphous Si layer is obtained by dry etching. Theamorphous silicon gentle slope structure can be controlled with a minimum angle of less than 30°. The preparation method is simple and compatible with the semiconductor process, can avoid the overetching and angle inhomogeneity caused by the wet etching.

    参考文献
    相似文献
    引证文献
引用本文

秦康宁,张根,杨泰,钟慧,蒋欣,杜波,马晋毅.在非晶硅上制备角度可控缓坡的方法[J].压电与声光,2018,40(5):670-673. QIN Kangning, ZHANG Gen, YANG Tai, ZHONG Hui, JIANG Xin, DU Bo, MA Jinyi. Method of Preparing the Angle Controllable Slope on Amorphous Si[J]. PIEZOELECTRICS AND ACOUSTOOPTICS

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-10-16
  • 出版日期: